Connect with an FHOPE Specialist +86-150-21705930

 

Milling cutters and their uses

Milling cutters and their uses

Modern CNC milling centers can use various tools to make machine operators familiar with different types of milling cutters and how to use them in daily milling. The purpose of this article is to help customers identify different types of milling cutters and their uses. Introduce The rotary multi edge milling cutter is used to pr...

The choice of drill manufacturing

The choice of drill manufacturing

Because this is a kind of optimization of nanostructures, can make the hardness, toughness and resistance of residual stress in balance, therefore, in all kinds of drilling applications, from the companys AlTiN coating is a generic solution, it is a universal coating solution. Do you need to drill steel, stainless steel or cast i...

Percentage of thread and tap selection

Percentage of thread and tap selection

Many variables affect the performance of threads and the faucet used to generate them. A very important factor is the size of the drill used to generate the hole that will be mined. Most of the taps are only about the size of a drill bit, which will produce about 75 percent of the threads. Generally speaking, using a lower thread...

Manufacturing process of aluminum end mill

Manufacturing process of aluminum end mill

The residual oxide in aluminum from smelting or casting process is a source of abrasiveness in all aluminum grades. In fact, many industrial Abrasives contain the same material - alumina. The cast grade aluminum can contain alumina from the casting process, and it can also contain more erosive silicon oxide. To combat these abras...

Dissection of aluminum alloy end milling cutter

Dissection of aluminum alloy end milling cutter

There are four obstacles in active grinding of aluminum: flutter, chips adhered to the tool, the wear of the material, and the control of a large number of chips. Tool makers say that all these challenges can be solved by the correct tool design. The companys vertical milling cutter, a part of its production line, is an example o...

Surface Treatments of End Mills

Surface Treatments of End Mills

TiN(Titanium Nitride): Provides extremely high hardness and heat resistance, enabling TiN-coated tools to operate at higher speeds and feed. For general purpose use, TiNoffers higher lubricity for more free chip flow and reduces the formation of edges and pits. Use caution on non-ferrous materials because of a tendency. Need to i...

Aluminum end milling cutter series

Aluminum end milling cutter series

Aluminum end milling cutter series There are various types of vertical milling cutters in stock. U unique shape of the chip to ensure high feed rate lower chip with excellent results Processing. The double rear angle increases the strength of the cutting edge. Features Unique U flute - even in high input processing, excellent chi...

The introduction of carbide tools

The introduction of carbide tools

In the modern cutting process, the general trend is dry processing. But, there is material, because of the high temperature produced in the cutting area, dry processing can not be carried out. Even the most modern coating tools are the same. These are known as hard to cut materials, such as:Austenitic stainless steel, high temper...

Introduction about high-performance DLTUP600 Steel End Mills

Introduction about high-performance DLTUP600 Steel End Mills

High-hardened and chilled steel (HRC 45 ~ 70) for automotive and mold parts, with excellent durability and wear resistance. This hardened steel material obviously causes a large amount of tool wear on high-temperature relief surfaces in high-speed and dry machining. In addition, the tremendous impact that can occur during the mac...

The features and application of carbide rods

The features and application of carbide rods

Calloytool has achieved success in the innovation of aviation applications in China and in the world. UF09, 9%Co and superfine WC0.5 are a major achievement made by Callotool in the manufacturing of CFRP parts and components in aerospace industry. Features: High wear resistance excellent deformation resistance HSM - high speed ...

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Aluminum End Mill Machining