Connect with an FHOPE Specialist +86-150-21705930

Steel end mill

Steel end mill with the latest hardcore coating technology, these new levels have a wider range of applications

The Calloytool provides end mill for iron steel, roughing end mill, and will launch the new series end mill for steel, a new type of coating for processing hardened steel. This is a special kind of steel end mill,which provides predictable and long tool life in a range of applications, including rough machining and processing, including the use of hard steel, which usually needs to be removed with a large inventory. This strain has excellent abrasion resistance and crack resistance in the range of low to medium cutting speed, increasing the cutter life in continuous and interrupted cutting,.

DLTUPR650 series - Roughing Application

DLTUPR650 series - Roughing Application

The tool is mainly suitable for horizontal milling machine rough machining. The products using AlTiN Balzers coating, with superior performance. Special edge cutting processing is fit for rough machining and trench sidewall for work-piece. ...

DLTUPR650-4F-060 Roughing end mill for steel

DLTUPR650-4F-060 Roughing end mill for steel

This steel endmill cutting tool with carbide material, which combines increased stiffness with the good performance to do milling job at higher SFPM. Carbide roughing end mill tools are best choice in operating newer milling machines. Tool material composition: 1.Physical Properties: A)Hardness greater than or equal to 92.8 HRA;...

DLTUPR650-4F-060 Roughing end mill for steel

DLTUPR650-4F-060 Roughing end mill for steel

The end mill for steel with Outside Diameter(d) FluteLength(l) OverallLength(L) ShankDiameter Tool material composition: 1.Physical Properties: A)Hardness greater than or equal to 92.8 HRA; B) Density greater than or equal to 14.2 g/cm; C) TRS greater than or equal to 4200 N/mm;we are sales and application engineers can...

DLTUPM650 series - Micro Machining End Mill

DLTUPM650 series - Micro Machining End Mill

The tool is mainly suitable for horizontal milling machine deep processing. The products use AlTiN Balzers coating, with superior performance, and high hardness steel less than 65HRC; for the deep cavity machining in mold groove....

DLTUP600 series - High Efficiency Maching

DLTUP600 series - High Efficiency Maching

The tool is mainly suitable for horizontal milling machine processing of flat milling, side milling, slotting. The products use AlTiN Balzers coating, with superior performance. ...

DLTUP550 series - General Purpose

DLTUP550 series - General Purpose

The tool is mainly suitable for horizontal milling machine processing of flat milling, side milling, slotting. The products use AlTiN Balzers coating, with superior performance....

  • 当前第 1 页,共 16 条记录

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Aluminum End Mill Machining