Connect with an FHOPE Specialist +86-150-21705930

 Calloy is a professional manufacturer and supplier of cemented carbide products, for example, cemented carbide blanks,cemented carbide dies, cemented carbide wear parts, cemented carbide cutters, cemented carbide mine tools, cemented carbide special products,etc.
High hardness means high wear resistance of abrasives, and generally manufacturers usually achieve it by reducing resilience. The optimization of hardness and toughness is a good balance between the WC grain distribution and the binder phase composition. Calloy always adopt the best carbide stock, along with the best coating, which is the key to maximizing tool performance.



DLTUK60 series-Carbide Rods with 3 helical coolant holes(30°

DLTUK60 series-Carbide Rods with 3 helical coolant holes(30°

Three spiral coolant hole carbide rods are rods with three helix coolant holes. They have many applications, including the drill, the milling cutter and the reamer. The size and length of the custom are also available at these levels and in the metric size....

DLTUK60 series-Solid Carbide Rods with 2 helical coolant hole

DLTUK60 series-Solid Carbide Rods with 2 helical coolant hole

Our carbide rod excellent production center is both technically and capable of supporting new club level innovation and dynamic customer demand. We adhere to the production and inspection procedures in strict accordance with the ISO international standards....

DLTUK60 series-Dual straight hole rods

DLTUK60 series-Dual straight hole rods

Cemented carbide is a hard material with mechanical properties. Due to its composition and microstructure, it can be adjusted in a wide range. The hardness and toughness range of the calloytool brand includes everything from the wear tool steel to the super hard ceramic material....

DLTUK60 series-Single straight hole rods

DLTUK60 series-Single straight hole rods

The single straight hole cemented carbide rod is a hard alloy round rod with a radial hole. These rods are mainly used to make factories, bits, bits, and other tools....

DLTUK60 series-Fixed-length polished rods

DLTUK60 series-Fixed-length polished rods

Recommend the use of milling cutter, reamer and knife. High speed cutting performance is excellent. DLTUK60 is suitable for cutting hardened steel, aluminum alloy and titanium alloy....

DLTUK55 series-Solid core rods

DLTUK55 series-Solid core rods

Calloytool carbide rod manufacturer can provide carbide rod, Hard alloy end milling cutter, hard alloy bar with straight/spiral cooling holes. According to the requirements of the customer, shaped stick, t-shaped hard alloy rods, with steps and so on....

DLTUK65 series-Solid core rods

DLTUK65 series-Solid core rods

By mixing materials, extruding, sintering and shape modification, the tungsten carbide rod will be formed initially, and the tungsten carbide rod should be sintered under high pressure....

DLTUK60 series-Solid core rods

DLTUK60 series-Solid core rods

The Calloytool cemented carbide rod manufacturer only made hard alloy rods strictly according to these steps. The sintered tungsten carbide rod has the characteristics of high-hardness, high strength, stable chemical properties, low expansion coefficient and conductive and thermal conductivity. ...

  • 当前第 1 页,共 18 条记录

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Aluminum End Mill Machining