Connect with an FHOPE Specialist +86-150-21705930

 These cemented carbide tools drill the semicircular cone tip angle range to measure their 2030 degree and degree. 4560 stem size 1 / 8 "or" 3.175mm ". Printing marks a wide range of materials, such as carbon steel, stainless steel, aluminum, wood, plastics, resins, acrylic and soft metals, this copper and brass.
Small angle suggestions and cuts on shallow etching produce narrow small bits and accurate engraving characters and words.
Each bit is made of carbide micrograin "or"". Most metals, such as aluminum, copper, stainless steel, we recommend the use of a wider angle (or tools) 80inc 90inc awesome. Plastic materials, such as plastics, acrylics, wood, etc., 50 angle or 60 degree semicircle is the most popular, please determine the size of the tip requirements. The size of the needle will determine your breadth. Small sculptures are recommended for smaller sizes.


 DLTEK550 series-Flat bottom engraving bits

DLTEK550 series-Flat bottom engraving bits

We carry a wide variety of engraving cutters in many sizes and shapes. The most popular are the half round type cutters. These engraving tools can be used in a variety of applications from engraving plastic to engraving stainless steel. For plastic engraving we recommend a 50 degree or 60 degree cutter. Click on the tool sizes be...

 DLTEK550 series-Radiused bottom engraving bits

DLTEK550 series-Radiused bottom engraving bits

We carry a wide variety of engraving cutters in many sizes and shapes. The most popular are the half round type cutters. These engraving tools can be used in a variety of applications from engraving plastic to engraving stainless steel. For plastic engraving we recommend a 50 degree or 60 degree cutter. Click on the tool sizes be...

 DLTEK550 series-Double Flat bottom engraving bits

DLTEK550 series-Double Flat bottom engraving bits

We carry a wide variety of engraving cutters in many sizes and shapes. The most popular are the half round type cutters. These engraving tools can be used in a variety of applications from engraving plastic to engraving stainless steel. For plastic engraving we recommend a 50 degree or 60 degree cutter. Click on the tool sizes b...

  • 当前第 1 页,共 13 条记录

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Aluminum End Mill Machining