Connect with an FHOPE Specialist +86-150-21705930

DLTSG600 series-Diamond coating of Graphite end mill

Literal stament:
Graphite endmills is used for the modern industry of processing graphite ,alloy cutting. Because of its characteristics of soft graphite, we use coarse grain size tungsten carbide with low content cobalt, at the same time, and we use coarse grain size diamond coating, this best combination ensures the good life of the tool.
Features:
1、Special substrate with the perfect combination of diamond coating,superior wear resistance.
2、Suitable for semi-finishing and finishing of graphite,apply for air cooling.

DLTSG600 series-Diamond coating of Graphite end mill

Regular size:
square 4 flute graphite end mill
ordering code D Lc L d
DLTSG600-S4-02006 2 6 50 4
DLTSG600-S4-03009 3 9 50 4
DLTSG600-S4-04010 4 10 50 4
DLTSG600-S4-05013 5 13 50 6
DLTSG600-S4-06015 6 15 50 6
DLTSG600-S4-08020 8 20 60 8
DLTSG600-S4-10025 10 25 75 10
DLTSG600-S4-12030 12 30 75 12
DLTSG600-S4-64011 64 11 50 6

DLTSG600 series-Diamond coating of Graphite end mill

ordering code D Lc r L d
DLTSG600-R4-02002 2 3.5 0.2 50 4
DLTSG600-R4-03002 3 4 0.2 50 4
DLTSG600-R4-04010 4 6 1 50 4
DLTSG600-R4-05003 5 7 0.3 50 6
DLTSG600-R4-06005 6 9 0.5 50 6
DLTSG600-R4-06010 6 9 1 50 6
DLTSG600-R4-08005 8 12 0.5 60 8
DLTSG600-R4-08010 8 12 1 60 8
DLTSG600-R4-10005 10 15 0.5 75 10
DLTSG600-R4-10010 10 15 1 75 10
DLTSG600-R4-12005 12 18 0.5 75 12
DLTSG600-R4-12010 12 18 1 75 12

DLTSG600 series-Diamond coating of Graphite end mill

ordering code D R Lc L d
DLTSG600-B2-01002 1 0.5 2 50 4
DLTSG600-B2-02004 2 1 4 50 4
DLTSG600-B2-03006 3 1.5 6 50 4
DLTSG600-B2-04008 4 2 8 50 4
DLTSG600-B2-05010 5 2.5 10 50 6
DLTSG600-B2-06012 6 3 12 50 6
DLTSG600-B2-08014 8 4 14 60 9
DLTSG600-B2-10018 10 5 18 75 10
DLTSG600-B2-12022 12 6 22 75 12
Tool material composition:
1.Physical Properties:
A) Hardness greater than or equal to 93.5 HRA;
B) Density greater than or equal to 14.6 g/cm³;
C) TRS greater than or equal to 3600 N/mm²;
2.All the tools of production, coatings are used in Germany, Switzerland,  processing equipment;
Coating:
Ultra Fine Grain Diamond Coating
Characteristics and Function
1、High purity diamong coating,with hardness up to 80GPa.
2、Ultra smooth nad shiny surface,low coefficient friction.
3、Suitable for finish machining nonferrous materials,such as graphite,aluminium,carbon fiber,ceramic,etc.
Attention:
1、Make sure work piece and machine are stable and use a precision holder.
2、Please adjust the speed,feed and cutting depth according to actual cutting conditions.
3、The milling conditiongs are for an end mill where the tool overhang length is less than 4*D(mill dia).
When the tool overhang length is longer, please adjust the speed,feed and cutting depth.

Product Literature

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Aluminum End Mill Machining