Connect with an FHOPE Specialist +86-150-21705930

General turning cutting tool

Turning insert for steel-DK55 series

Literal statement:
DK55 is widely used at all kinds of occasions with perferable toughness.
Feature:
DK55 Insert is suitable for the processing of refractory steel, high manganese steel and ordinary steel.
Regular size:
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
CNMG090308 9.7 9525 3.IX 3.81 0.8
CNMG120404 12.9 12.7 4.76 5.16 0.4
CNMG120408 12.9 12.7 4.76 5.16 0.8
CNMG120412 12.9 12.7 4.76 5.16 1.2
CNMG120416 12.9 12.7 4.76 5.16 1.6
CNMG160608 16.1 15.875 6.35 6.35 0.8
CNMG160612 19.3 19.05 6.35 7.94 1.2
CNMG190608 9.7 9525 3.1H 3.81 0.8
CNMG190612 12.9 12.7 .76 5.16 1.2
CNMG190616 16.1 15.875 6.35 6.35 0.8
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
DNMG110404 11.6 9.525 4.76 3.81 0.4
DNMG110408 11.6 9.525 4.76 3.81 0.8
DNMG150404 15.5 12.7 4.76 5.16 04
DNMG150408 15.5 12.7 4.76 5.16 0.8
DNMG150412 15.5 12.7 6.35 5.16 1.2
DNMG150604 15.5 12.7 6.35 5.16 0.4
DNMGI50608 15.5 12.7 6.35 5.16 0.8
DNMG150612 15.5 12.7 6.35 5.16 1.2

Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
SNMG090304 9.525 9.525 3.18 3.81 0.4
SNMG090308 9.525 9.525 3.18 3.81 0.8
SNMG120404 12.7 12.7 4.76 5.16 0.4
SNMGI20408 12.7 12.7 4.76 5.16 0.8
SNMG120412 12.7 12.7 4.76 5.16 1.2
SNMG120416 12.7 12.7 4.76 5.16 1.6
SNMG150608 15.875 15X75 6.35 6.35 0.8
SNMG150612 15.875 15.875 6.35 6.35 1.2
SNMG150616 15.875 15.875 6.35 6.35 1.6
SNMG190612 19.05 19.05 6.35 7.94 1.2
SNMG190616 19.05 19.05 6.35 7.94 1.6
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
TNMG110304 11 6.35 3.18 3.81 0.4
TNMG160304 16.5 9.525 3.18 3.81 0.4
TNMG160404 16.5 9.525 4.76 3.81 0.4
TNMG160408 16.5 9.525 4.76 3.81 0.8
TNMG220404 22 12.7 4.76 5.16 0.4
TNMG220408 22 12.7 4.76 5.16 0.8
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
WNMG06T304 6.5 9.525 3.97 3.81 0.4
WNMG06T308  6.5 9.525 3.97 3.81 0.8
WNMG060404 6.5 9.525 4.76 3.81 04
WNMG060408  6.5 9.525 4.76 3.81 0.8
WNMG080404 8.7 12.7 4.76 5.16 0.4
WNMG080408  8.7 12.7 4.76 5.16 0.8
WNMG0804I2  8.7 12.7 4.76 5.16 1.2
WNMG0804I6  8.7 12.7 4.76 5 16 1.6
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
VNMG160404 16.6 9.525 4.76 3.81 0.4
VNMG160408 16.6 9.525 4.76 3.81 0.8
VNMG160412 16.6 9.525 4.76 3.81 1.2
VNMG220404 22.1 12.7 4.76 5.16 0.8
VNMG220408 22.1 12.7 4.76 5.16 1.2
VNMG220412 22.1 12.7 4.76 5.16 1.2
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
CCMT060202 6.5 6.35 2.38 2.8 0.2
CCMT060204 6.5 6.35 2.38 2.8 0.4
CCMT060208 6.5 6.35 2.38 2.8 0.8
CCMT09T302 9.7 9.525 3.97 4.4 0.2
CCMT09T304 9.7 9.525 3.97 4.4 0.4
CCMT09T308 9.7 9.525 3.97 4.4 0.8
CCMT120404 12.9 12.7 4.76 5.56 0.4
CCMT120408 12.9 12.7 4.76 5.56 0.8
CCMT120412 12.9 12.7 4.76 5.56 1.2
CCGT060202 6.5 6.35 2.38 2.8 0.2
CCGT060204 6.5 6.35 2.38 2.8 0.4
CCGT060208 6.5 6.35 2.38 2.8 0.8
CCGT09T302 9.7 9.525 3.97 4.4 0.2
CCGT09T304 9.7 9.525 3.97 4.4 0.4
CCGT09T308 9.7 9.525 3.97 4.4 0.8
CCGT120404 12.9 12.7 4.76 5.56 0.4
CCGT120408 12.9 12.7 4.76 5.56 0.8
CCGT120412 12.9 12.7 4.76 5.56 1.2
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
DCMT070202 7.8 6.35 2.38 2.8 0.2
DCMT070204 7.8 6.35 2.38 2.8 0.4
DCMT070208 7.8 6.35 2.38 2.8 0.8
DCMT11T302 11.6 9.525 4.76 3.81 0.4
DCMT11T304 11.6 9.525 4.76 3.81 0.8
DCMT150404 15.5 12.7 4.76 5.16 04
DCMT150408 15.5 12.7 4.76 5.16 0.8
DCMT150412 15.5 12.7 6.35 5.16 1.2
DCGT070202 7.8 6.35 2.38 2.8 0.2
DCGT070204 7.8 6.35 2.38 2.8 0.4
DCGT070208 7.8 6.35 2.38 2.8 0.8
DCGT11T302 11.6 9.525 4.76 3.81 0.2
DCGT11T304 11.6 9.525 4.76 3.81 0.4
DCGT11T308 11.6 9.525 4.76 3.81 0.8
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
TCMT090204 9.6 5.56 2.38 2.5 0.4
TCMT110202 11 6.35 2.38 2.8 0.2
TCMT110204 11 6.35 2.38 2.8 0.4
TCMT110208 11 6.35 2.38 2.8 0.8
TCMT16T304 16.5 9.525 3.97 4.4 0.4
TCMT16T308 16.5 9.525 3.97 4.4 0.8
TCMT16T312 16.5 9.525 3.97 4.4 1.2
TCMT220408 22 12.7 4.76 5.56 0.8
TCGT090204 9.6 5.56 2.38 2.5 0.4
TCGT110202 11 6.35 2.38 2.8 0.2
TCGT110204 11 6.35 2.38 2.8 0.4
TCGT110208 11 6.35 2.38 2.8 0.8
TCGT16T304 16.5 9.525 3.97 4.4 0.4
TCGT16T308 16.5 9.525 3.97 4.4 0.8
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
WCMT06T304 6.5 9.525 3.97 3.81 0.4
WCMT06T308  6.5 9.525 3.97 3.81 0.8
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code L  D     S  dl R
VBMT160404 16.6 9.525 4.76 4.4 0.4
VBMT160408 16.6 9.525 4.76 4.4 0.4
VCMT110304 11.2 6.35 3.18 2.8 0.4
VCMT160404 16.6 9.525 4.76 4.4 0.4
VCMT160408 16.6 9.525 4.76 4.4 0.8
VCGT110304 11.2 6.35 3.18 2.8 0.4
VCGT160404 16.6 9.525 4.76 4.4 0.4
VCGT160408 16.6 9.525 4.76 4.4 0.8
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code D S dl
RDKW0802 8 2.38 2.94
RDKW100300 10 3.97 4.4
RDKW120400 12 4.76 4.4
Turning insert for steel-DK55 seriesTurning insert for steel-DK55 series
  Dimension
   Ordering code D S dl
RDKT0802 8 2.38 2.94
RDKT10T300 10 3.97 4.4
RDKT120400 12 4.76 4.4

Insert material composition:
1.Physical Properties:
A) Hardness greater than or equal to 92.6 HRA;
B) Density greater than or equal to 14.4 g/cm³;
C) TRS greater than or equal to 3800 N/mm²;
D) Free of ETA phase condition;
E) No contamination by other materials;
F) Porosity = A02 / B00 / C00 ;
G) Uniform and consistent grain size. No grain size can be   larger than specified.
H) Chromium carbide grain growth inhibitor only.
2.All the tools of production, coatings are used in Germany, Switzerland,  processing equipment;

Coating:
Position of Main PVD Nano-structure Coating
PVD coating provides for superior control of coating grain size(from 10nm to 500nm),achieves excellent hardness,good oxidation resitant,and improved reduction of the coefficient of friction.
 
Attention:
1、Make sure work piece and machine are stable and use a precision holder.
2、Please adjust the speed,feed and cutting depth according to actual cutting conditions.

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Aluminum End Mill Machining