Taper shank drill-High-speed steel and cobalt drill,deep hole drilling

Taper shank drill-High-speed steel and cobalt drill,deep hole drilling

Uncategorized 0 Comment 16

In modern technology advanced factories, tools made of top materials. From mining ore to smelting steel to producing final products, these tools undergo rigorous quality tests at every step of production. This range of products includes a variety of products: general purpose and heavy drill, various lengths and styles; Taper shank drill; Silver; Dai Ming exercises; Double-head exercises; And training sets. High-speed steel and cobalt drill can be used.

Choose heavy styles to have flat shoes on your calves, or cut down 3/8 “more compact portable drills on your calves. This product includes the general purpose of the manual faucet, spiral point tap, taper pipe tap and straight pipe tap. Various drills and taps, including metric systems, are available.

According to the report, in the deep hole drilling applications up to 30 xd, under the condition of new type of cemented carbide wr deep hole drill compared with the gun drill, in three to four times between the metal, in addition to providing good hole quality and cycle time, will also be removed.

Senior global product manager Chris Merlin said: “three to four times that of the metal removal rate, means that with an improvement of the customer’s bottom line, whether additional capacity, increase production, increase the drilling equipment or better use of personnel.”

In 15XD, 20XD, 25XD, and 30XD, the length ratio of the new wr deep hole drill is available. The available diameter ranges from 3.0 to 13.0 mm. With the improvement of performance, the hard alloy deep hole drilling method increases the versatility of the machining process and does not require special drive or guide bushing. The wr deep hole drill can be used for machining center, which can be used in gun drilling machine.

With a 132 degree taper geometry, wr deep hole drilling rig has low thrust and good central capability, which improves the quality of the hole. The four-sided design improves the stability of the cutting, the advanced PVD coating, and the highly polished surface increase the wear resistance, reducing the friction on the edge and edge.

Merlin added: “using these tools, tool life and higher feed rate is a big advantage, and added that customers will drill more holes on each drill to drill, to obtain a longer life expectancy, and more in every drilling regrinding.”

Author

Leave a comment

You must be logged in to post a comment.

Back to Top