In a customer performance test, a Calloy tool drill 861 with a diameter of 0.406 in diameter was used for…
For more milling information about the CHS300 insert or RHN/RP tool, please contact the local Calloy representative or visit our CHS300 product page.
The Calloy’s MP2050 plug-in class can conquer powerful heat-resistant materials
A new kind of substrate and a coating is applied to its post-processing enhanced MHP2050 the ability to deal with high fever in the cutting area, and effectively prevent the chip adhesion and trimming, so as to improve the stability of high technology and predictability. The composite substrate reliability and wear resistance of the coating have overcome the unstable mechanical processing conditions, such as interrupt cutting, long blade suspension and weak clamping device. In addition, by extending tool life, cutting tool costs and allowing the cutting parameters to increase, especially in dry processing conditions.
MHP2050 includes round inserts of 10, 12, 16 and 20. High feed inserts, square shoulder insert turbine, square 6 and square T4, and face milling insert double Octomill also available.
Calloy flutes has a larger spiral and central chip area, as well as a smoother chip flute outlet and calloy engineering wave mode to minimize the contact between the chip and the flute surface. The drill can produce short chips, which can be evacuated quickly and easily, greatly reducing the risk of chip interference and improving application security.
The SETC’s laser hardened calloy flute in its 140% long tool life. HRC 60 hardness allows the drill to withstand longer chip erosion. Insert a larger radius at the bottom of the drill to increase rigidity.
DHS2050 and DHS4050 insert performance is especially suitable for heat resistant materials such as titanium alloy and titanium alloy. Thanks to recent developments in the free cutting of MHP and MHC geometry, these grades increase productivity and extend the life of the tool. DHS2050 is the liner of edge cutting and DHS4050 is the central cutting pad.